Email
Online Service

Motor controller – Large size bus drive solution

GTAKE provides EV motor controller and EV Motor Control Unit solutions for pure electric buses, hybrid electric vehicles and other commercial electric vehicles. The product portfolio covers different power levels and vehicle architectures, with motor controller solutions designed to manage motor speed, torque, power output and other key traction functions.

For large electric buses, GTAKE combines high-power EV/HEV traction motor controllers, vehicle control technologies and modular system design to support demanding electric drive applications. The solution is designed for stable operation, smooth torque delivery and reliable power control across different road and load conditions.

The electric bus motor controller works between the battery system and traction motor, converting and regulating electrical power according to vehicle operating conditions. Combined with the EV management controller and battery system, it forms an integrated electric bus drive system for commercial passenger transportation.

GTAKE’s EV motor controller products have been developed and tested for electric vehicle applications, with protection, communication and motor control functions designed for demanding vehicle operating environments. The current EV Motor Control Unit portfolio includes G02, G03, G04, G05 and M-series traction motor controllers.

The large size bus drive solution is mainly designed for 10–12 m and 18 m pure electric buses, where the electric drive system typically requires more than 80 kW of rated power and a high-voltage battery system of 500 V DC or above, such as 518 V, 540 V, 580 V and 600 V platforms.

Typical vehicle applications include:

  • Pure electric buses
  • Large electric buses
  • Travel buses
  • Shuttle buses
  • Luxury buses
  • Other high-capacity commercial electric vehicles

The solution can support both permanent magnet synchronous motors and AC asynchronous motors, allowing vehicle manufacturers to select a suitable motor and controller combination according to the powertrain architecture.

GTAKE’s new energy vehicle controllers also support modular configurations, including single-controller drive, master controller with auxiliary units and multiple-controller drive combinations. The actual controller configuration can be selected according to vehicle power, battery voltage, motor type and drivetrain requirements.

Applications of the Large Size Bus Drive Solution

The solution is suitable for commercial passenger vehicles that require high-power electric traction and reliable operation over different driving conditions.

Typical applications include:

Pure Electric City Buses

For urban public transportation, the electric bus motor controller provides controlled motor torque and speed for frequent acceleration, deceleration and stop-and-go operation.

10–12 m Electric Buses

The solution can be configured for medium-to-large city buses and travel buses according to the required battery voltage, motor power and vehicle architecture.

18 m Electric Buses

For higher-capacity articulated or long-body electric buses, high-power EV/HEV traction motor controllers can be configured according to the vehicle’s powertrain requirements.

Travel and Shuttle Buses

The system can also be used for electric travel buses and shuttle buses where smooth driving performance, high-efficiency operation and reliable motor control are required.

Motor controller - Large size bus drive solution

Program Features

  • Automotive-grade hardware and modular software: The EV motor controller uses an automotive-oriented hardware design with high power density, compact dimensions and reduced weight. Modular software architecture, protection functions and fault management help support reliable operation in commercial electric vehicles.
  • Smooth dynamic motor control: Advanced motor control algorithms provide fast dynamic response and stable torque output, helping the traction motor operate smoothly across different vehicle speeds, road conditions and load conditions.
  • High torque output across the speed range: The electric bus motor controller provides strong torque output across the operating speed range. Torque remains smooth in the constant-power region, supporting vehicle acceleration, climbing and other high-load operating conditions.
  • High-efficiency electric drive system: The controller and motor system are designed to maintain high operating efficiency across a wide operating range. GTAKE’s current G04 platform, for example, supports a system efficiency above 94% under specified conditions, while its motor system efficiency can exceed 96%.
  • Comprehensive control and protection functions: The solution can support functions including speed limitation, temperature adaptation, short-circuit protection, overcurrent and overvoltage protection, over-temperature protection, overload protection, communication fault handling and battery feedback adjustment.
  • IP67 protection: GTAKE’s applicable EV motor controller platforms use IP67 protection to improve resistance to water, dust and demanding vehicle operating environments. G04, for example, is specified with IP67 protection and water cooling.

System Functions

The electric bus drive system integrates the battery pack, EV controller, EV management controller and traction motor to coordinate the vehicle’s electric powertrain.

The battery pack provides DC electrical power to the EV controller. The EV management controller sends vehicle-level control commands according to driving conditions, while the EV controller regulates the electrical output delivered to the traction motor.

This system architecture allows the EV motor controller to coordinate key motor parameters such as torque, speed and power output. During acceleration, climbing and other high-load conditions, the controller adjusts motor output according to the required driving torque. During deceleration, the system can also coordinate regenerative braking according to the vehicle’s control strategy.

This coordinated architecture helps connect the battery, controller and motor into an integrated electric bus powertrain.

Large Electric Bus Powertrain Configuration

A typical large electric bus powertrain consists of several key components:

Battery Pack → EV Controller → Traction Motor

The EV management controller communicates with the motor control system and coordinates vehicle-level operating commands. The EV motor controller then manages the traction motor according to the required torque, speed and power output.

For large buses, controller selection should consider several parameters, including:

  • Battery DC voltage
  • Required motor power
  • Peak current
  • Motor type
  • Vehicle size and weight
  • Driving conditions
  • Cooling requirements
  • Vehicle communication architecture

This configuration allows the electric vehicle motor controller to be matched with different high-voltage battery and traction motor systems according to the requirements of the vehicle manufacturer.

Motor controller - Large size bus drive solution

Related Products

The G04 EV/HEV Motor Controller is particularly relevant to large commercial electric vehicles. It supports a 540 V DC rated voltage platform, with an input voltage range of 400–750 V DC and peak current options up to 900 A for 1 minute. GTAKE specifies synchronous and asynchronous motor compatibility, IP67 protection and water cooling. The product is listed for applications including trucks and buses over 12 m.

Need Help? Send a WhatsApp message now

Click one of our representatives below

James
James

Marketing Support

Tonny
Tonny

Marketing Support

Frank
Frank

Marketing Support

Victor
Victor

Marketing Support

CHOOSE YOUR LANGUAGE
TYPE TO SEARCH

Fax:+86 755 86392625
Tel:+86 755 86392623
Tel:+86 755 86392601
Email:info@gtake.com.cn