SLR01A – Farm irrigation

Solar pumping system can satisfy the water requirement in the area which is far from or without power grids. it can provide safe and high-efficiency power supply solution for farm and satisfy different kinds of irrigation requirements. Solar farm irrigation system consists of solar modules, SLR01A solar pump drive, water pump and irrigation devices. This system uses solar power to drive water pump instead of traditional diesel or electric supply,. The whole system is easy installation, reliable, ecological saving and high efficiency.

Program Features

  • The system can be powered by PV components directly. If needed, the mode of dual-track power supply (commercial power supply or diesel generator) can be added, which maximally make the clean and traditional energy complementary. At the same time, it also supports close-loop control which can control the flow, pressure and liquid level automatically and precisely.
  • SLR01A drives are equipped with three operation modes. Both plug-and-play mode for robust MPPT operation and senior mode for the best performance of MPPT require a few parameter settings. Professional mode is for the users who ask for functions like pressure limit mode, multi-step pressure control, and escapology on pump filter blocking on cloudy days, etc.
  • The SLR01A solar pump drive is tailored to effectively use the energy from the sunshine. Its inbuilt maximum power point tracking functionality always feeds the maximum amount of power possible from the panels to the pump.
  • When sunlight radiation meets the threshold requirement, the GTAKE solar pump drive starts automatically, and the pump connected to it begins to run. When the sunshine is weak, the pump will fall into sleep.
  • Dry run protection is one of quite important functionalities for automatic operation of the water pumping system, realized by GTAKE without requirement of signal feedback from any devices.
  • Pressure limit mode under power supply from solar panels. Users need to use this functionality in some water supply systems, when the pressure needs to be limited not to exceed a certain value.
  • Pressure control mode under AC power supply from grid or diesel generator. Users would like to use this functionality in some water supply systems, when the pressure is required to be a constant value and the drive are being connected to AC power supply from grid or diesel generator.
  • Multistep pressure mode. This functionality is quite useful sometimes for farm irrigation when different area requires different pressure values..

System Functions

Related Products

SLR01A is the dedicated inverter for solar pump system which can be applied for agricultural irrigation, water treatment, city parks, foundation, etc. Its unique and advanced MPPT algorithm ensures that the max. efficiency reachs to 99% and more water can be pumped per day than other brands.

Need Help? Send a WhatsApp message now

Click one of our representatives below


Marketing Support


Marketing Support


Marketing Support


Fax:+86 755 86392625
Tel:+86 755 86392623
Tel:+86 755 86392601

Online Service